| Start |  |
Contact | |
Back |
|
||||
Numbering System |
||||
| + Differential Roller Screws |
|
+
Ballscrews
|
| +
Internal Recirculation |
| +
High Speed Line |
|
FAQ
|
|
The Steinmeyer numbering system is divided in two parts:
|
 |
|
For enquiries please use the type number listed here. Please make sure to provide us also with drawings of the screw journals and with additional information regarding accuracy grade, preload etc. Once a customized design has been created, it will be assigned an individual item number. |
|
Order No. (Ballscrews)
Order No. (Nut)
Please note:
Dimensions
in item numbers, such as nominal diameter, lead or length, will be separated
by periods. Decimals will be shown using a comma instead of decimal point.
Example: 1414/5,08.16.013
Meaning: dN : 16 mm P: 5.08 mm
Extra ballcircles
for increased load carrying capacity
If you cannot find a nut to meet your load capacity requirement,
please also enquire. Standard nuts as per this catalog, as well as customized
nuts, are available with additional load carrying ballcircles to provide
higher load carrying capabilities.