The technology concept for status monitoring of ball screws.
1 Machine control with traffic light indicator and warning message
2 ifm electronics module with intelligent software,…
Direct and real-time preload monitoring.
Monitoring of Preload.
In machine tools industry, unexpected failures of ball screws is an expensive event. One of the most frequent failure modes is the…
Unambiguous and reproducible results.
Unambiguous and reproducible results.
Steinmeyer produced special shafts where the thread was ground in three diameters for basic testing. The idle torque of…
Cost savings - expecially in serial production.
Real-time status monitoring allows considerable cost savings in practical operations thanks to planned maintenance.
Steinmeyer Guard Plus technology…
Support bearings facilitate rotation of the shaft while transmitting axial loads from the ball screw into the surrounding structure. They have to do that with minimum friction and the smallest…
The purpose to pre-tension a ball screw is to compensate for thermal expansion during operation and thus avoid compressive forces as the shaft expands between the two fixed bearings. The goal is to…
Support bearings must be able to carry not only the thrust produced by the ball screw, but also any additional forces from pre-tensioning the ball screw shaft, plus any side forces generated by…
The innovative "ETA+" ball screw from Steinmeyer comes very close to providing the ideal linkage between motor and slide. From the reduced friction and at the same time increased…
Electromechanical Actuators
For various other actuators in aviation applications, Steinmeyer draws on a broad spectrum of cost-optimized products. These include various applications such as…
Reliability in all conditions
While the renewable energies industry is still young, it has grown significantly in recent years. In co-operation with our customers, Steinmeyer develops solutions for…
